Instructions | How to install Replacement Canopy on a Hanging Style Offset Cantilever Umbrella

Watch Video: Behind the Browser: AI Edition Highlights 

Assembly Instructions — Hanging Style Cantilever Umbrella

Note: Depending on your height and setup, you may need a ladder to reach the top of the canopy. If that is not possible, you may carefully lay the umbrella down, though this is not the preferred method.

  1. Remove Old Canopy

    • Untie, unstrap, or detach any Velcro securing the old canopy to the frame.

    • Slide the old canopy off the umbrella ribs.

  2. Prepare New Canopy

    • Open the new canopy by separating the Velcro at the top.

    • Slip the canopy onto the umbrella by feeding the ribs through the detached air-vent hole. 

  3. Insert Ribs into Pockets

    • Guide each rib end into its corresponding fabric pocket.

    • Ensure each rib is fully seated. 

  4. Secure Top of Canopy

    • Pull the canopy upward until it reaches the umbrella’s top center hub.

    • Refasten the Velcro at the air vent and tie the rope securely. 

  5. Final Tie-Down

    • Stand the umbrella upright and open it fully.

    • Inside the canopy, locate the four ropes.

    • Tie each rope to every other rib toward the center for added stability. 

 

Care Instructions — Hanging Style Cantilever Umbrella

  • Brush to clean: Use a soft brush to remove dirt, dust, and loose debris.

  • Spot clean only: The canopy is removable. Spot clean with water and mild soap, then allow to air dry completely before use.

  • Protect when not in use: Always close the umbrella and use a protective cover to extend the life of the fabric and preserve the canopy color.